Ordering code: SLM125

The modulator unit LUMiBOX SLM-125 (Smart Light Modulator) forwards control commands received from a control unit via RS485 through powerlines to luminaires with installed LUMiNODE modules. In case of luminaires equipped with certified DALI drivers and LUMiNODE SDM-DIG or LUMiNODE/NEMA7 the unit is able to receive status reports from those drivers and will send them to the control unit.


Two-way powerline communication QM-50-SSI3

Designed for street lighting with low data transfer

Thermal protection

Communication with the controller via RS485 bus (MODBUS protocol)

The module is set in a standard 9M box for mounting on a DIN35 rail


Parameter Value
Input voltage AC 220 V ~ 240 V; 50 Hz
Maximum operating current 25 A
Idle consumption 1,7 W
Interface RS485
Communication distance up to 5000 m
Power factor >0,95
Safety class II.
IP Rating IP20
Operating ambient temperature -25 °C ~ +75 °C
Dimensions (L x W x H) 157 x 86 x 58 mm
Weight 460 g

Wiring diagram

Parameter Value
Power section 4 mm2 stranded,
6 mm2 or 2 x 2,5 mm solid
Control section 1,5 mm2 stranded,
1,5 mm2 or 2 x 0,75 mm2 solid

Other products


You can always contact us. We will be happy to answer any questions you may have regarding the operation and implementation of a smart lighting control system.
01004, Ukraine, Kiev, Pechersky district, Velyka Vasylkivska street 9/2, office 59.