DIMMING MODULES
LUMiNODE SDM-DIG-IP
Ordering code: LMNDIGIP
The LUMiNODE SDM-DIG-IP module is designed for two-way communication of luminaires with a two-way DALI bus driver and the control unit over the powerline. The module acts as converter between the QM-50-SSI3 and DALI protocols. It allows you to define lighting schedules along with different intensity levels, lag and fade time to be used when motion is detected (switch on).
Features
Two-way powerline communication QM-50-SSI3
Lighting control in real time
Autonomous lighting control
Ability to mass upload a new schedule in groups
Setting the control intensity levels according to DIN input switching
Regulation from 0 to 100%
Both output buses are galvanically isolated from the input
Can control up to 2 DALI drivers
Characteristics
Parameter | Value |
---|---|
Input voltage | AC 220 V ~ 240 V; 50 Hz |
Consumption | 0,5 W |
Communication interface | 2-way powerline QM-50-SSI3 |
Output | 2-way DALI for one slave |
Communication distance | up to 5000 m |
Protection class | II. |
IP rating | IP65 |
Dimensions (L x W x H) | 123 x 70 x 16,5 mm |
Weight | 196 g |
Operating ambient temperature | -20 °C ~ +75 °C |
Case temperature | +80 °C |
Max. wire size | 0,2-0,75 mm2 solid/stranded |
Compliance with | EN 61 347-1, EN 61 347-2-11, EN 55 015, EN 61 000-3-2, EN 61 547, EN 61 000-3-3 |
Setting the control intensity levels according to DIN input switching (motion sensor)
Direct – increase the level to to the selected % of the intensity level
Additional – add the selected % of intensity level to existing level
Hold on time (s) – hold intensity level after DIN impulse ends
Fade step (ms) – lenght of transition between two intensity levels
Wiring diagram
Other products
AN OFFER FOR COOPERATION
You can always contact us. We will be happy to answer any questions you may have regarding the operation and implementation of a smart lighting control system.
office@hiddenenergy.com.ua | |
01004, Ukraine, Kiev, Pechersky district, Velyka Vasylkivska street 9/2, office 59. |